home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.applications
- Path: news.sprintlink.net!eskimo!news
- From: wendell@eskimo.com (wendell)
- Subject: Re: Printer Setups
- X-Nntp-Posting-Host: tia1.eskimo.com
- Message-ID: <810.6606T299T760@eskimo.com>
- Sender: news@eskimo.com (News User Id)
- Organization: Eskimo North (206) For-Ever
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP) *UNREGISTERED*
- References: <149999@cup.portal.com>
- Date: Fri, 2 Feb 1996 23:17:19 GMT
-
-
- On the subject of Printer Setups, Gary Alan Peake had this to say...
- GAP> I am using an A3000/25 and a Panasonic P2123 printer with Final Writer
- GAP> 4.01 and have one setup problem.
-
- GAP> My pages always print about 1/2 inch farther down the page than they
- GAP> should and the bottom margin is always 1/2 too far down the page. This
- GAP> doesn't vary by the settings I use with the Panapref Printer Driver
- GAP> setup by Wolfe Faust.
-
- Hey Gary,
-
- This sounds very similar to the problem I have with my Epson Stylus
- Color printer and Final Writer 4.01 using Studio II printer driver, except my
- pages are offset too far up and to the right. I haven't been able to correct
- it yet! I have tryed change different settings in Final Writer, but it doesn't
- *seem* to change anything.
-
- wendell@eskimo.com
-
-